antenna for Autel EVO model is advanced, operating on 2.4GHz frequency
with 9 dBi gain. The concept behind the look of the antenna was to make
it look like it was a part of the drone by default.Mounting the
range extender leads to permanent changes with the remote controller.
Designed for Autel Evo4Hawks
antenna for Autel Evo model is highly advanced, operating in 2.4GHz
frequency. The concept behind the look of the antenna was to make it
look like it was a part of the drone by default. Entire construction is
100% UV protected to assure longevity of the equipment..
Specification:Weight: 14gDimension: 40 * 25 * 11mmDisplay: LEDVoltage detection precision:±0.01VUnit voltage display range:0.5-4.5VTotal voltage display range:0.6-36V1S test mode voltage range: 3.7-30VLow voltage alarm mode for:1-8S Alarm set value range: OFF-2.7-3.8VPackage:2x Lipo Battery Voltage ..
Replacement 2.4Ghz 2dB Module Antenna for various Taranis radios and modules. The connection is RP-SMA.SpecificationsBrand Name: FrSkyItem Name: 2.4Ghz 2dB Module AntennaIncludes1 x 2dB Module Antenna..
If you have an older Taranis or Taranis plus with the soldered on antenna, this is what you need. This procedure requires good soldering skills to replace, only attempt if you do have good soldering skills and good soldering equipment! If your radio's serial number ends in B02, then you should have ..
Getting fuzzy video on your 1.2-1.3GHz receiver when using crossfire? This filter improves video reception for 1.2-1.3GHz video receivers in combination with TBS Crossfire.Due to the poor filtering on the video antenna input and the wide operation frequency of most common 1.2-1.3GHz video receivers,..
The Crossfire Antenna to Rule Them AllAntenna orientation, wear & tear, and non-directionality have been the source of some range issues with our long range and mini quad pilots. We sat down with IBCrazy and he designed this antenna to be as durable as possible. A diamond lasts forever!More Rang..
The True-MoX 915 is TrueRC's revision of the Moxon using latest 3D electromagnetic simulation tools and RF rated PCB material. Interactions with radio or pilot’s body are kept at near zero thanks to their patent pending design. This is the perfect radio antenna for TBS Crossfire. or FRsky ..
This antenna upgrade is perfect for extending the range of your LRS/UHF system.The Moxon rectangle is essentially a 2 element Yagi with the elements bent to direct the signal forward. The advantages of this antenna is the very high F/B ratio of about 25. Unlike the Yagi which has deep nulls to the s..
A 433 MHz omnidirectional simi rigid dipole antenna from IBCrazy.This antenna can be used with your UHF transmitter and receiver. The antenna can be installed vertically or horizontally to match your aircraft polerization...