DU-BRO METRIC CLEVIS

The DU-BRO Metric Clevis is the perfect solution to replace broken or inferior metric clevis' on imported aircraft. The Metric Clevis works on pushrods ranging in size from 1.3 mm to 1.4 mm.

To mount, you may need to enlarge the holes on your servo arm or control horn. If so, use a 1/16” or #52 drill bit and run the bit through a few times to clear the hole.

The clevis pin is 0.0635” This is a perfect upgrade or replacement for your stock metric clevis!

Qty: 4/pkg.

Made in USA