About:Grip-it™ has been specifically formulated for applying grips and mats for recreational vehicles. Grip-It™ works great on all makes of grips for motorcycles, jet skis, snowmobiles and bicycles. Grip-It™ has a 10-25 second working time and the grip is rideable within 5 minutes. Grip-It™ also wor..
About:IC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE™. IC-GEL™, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very co..
About:IC-LOC™ Purple prevents loosening of small fasteners from normal use and vibration, but parts can still be disassembled with hand tools. IC-LOC™ Purple seals and prevents rusting of threads.Directions:Shake well. Unscrew cap and cut off tip. Apply IC-LOC™ Purple to clean and dry threaded areas..
About:Works on all surfaces, including: glass, cardboard, plastic, fiberglass and everything else. INSTA-CLEAN™ is ideal for removing price stickers and their adhesive residue. INSTA-CLEAN™ will also remove scuff marks that regular household cleaners won't touch.Directions:Spray directly onto the st..
About:Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a va..
About:Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feath..
About:Super-Fix™ is two-part adhesive system developed to fill gaps and voids. It is sandable and paintable and cures in 1 - 3 seconds. Super-Fix™ is great for repairs at home, on autos, boats, and motorhomes. The super-thin consistency is perfect for bonding Metal, Plastic, Wood, Ceramics, Rub..
About:UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and..
Here's the in between 3500KV, as with previous motors in the GL range:- linear power control.- High efficiency of energy conversion.- Better torque than Kyosho VE motor series.- JAPAN high quality duel ball Bearing included.- no power fade at higher temperatures.- 15mm diameter...