Menu
Your Cart

Savox SH-1250MG Digital Metal Gear "High Torque" Mini Servo

Savox SH-1250MG Digital Metal Gear "High Torque" Mini Servo
Savox SH-1250MG Digital Metal Gear "High Torque" Mini Servo
Savox SH-1250MG Digital Metal Gear "High Torque" Mini Servo
Savox SH-1250MG Digital Metal Gear "High Torque" Mini Servo
Savox SH-1250MG Digital Metal Gear "High Torque" Mini Servo
Savox SH-1250MG Digital Metal Gear "High Torque" Mini Servo
Savox SH-1250MG Digital Metal Gear "High Torque" Mini Servo
Savox SH-1250MG Digital Metal Gear "High Torque" Mini Servo
Savox SH-1250MG Digital Metal Gear "High Torque" Mini Servo
  • Stock: In Stock
  • Model: Savox Digital SH-1250MG
196 sold
Product Views: 1048
$70.00

This is the Savox SH-1250MG Digital Metal Gear High Torque Servo. The Savox SH-1250MG is a metal gear, mini sized cyclic servo that is recommended for 500 class helicopter Cyclic applications.

Features:

  • Coreless Motor provides high speed, incredible efficiency, and low power consumption.

  • 10 Bit signal resolution for smooth movement.

  • The aluminum case design not only looks good but lowers operating temperatures.

  • Precision metal gears form a strong and solid framework.

  • Supports digital and analog control signals.

  • Ideal cyclic servo for 500 class helicopters and other aircraft that can benefit from a mini size metal gear servo.


Specifications:

  • Torque @ 6.0V: 63 oz-in / 4.6kg-cm

  • Speed @ 6.0V: 0.11/60°

  • Voltage Range: 4.8-6.0V

  • Weight: 29g

  • Type: Micro

  • Gear: Metal

  • Case: Aluminum Heatsink

  • Output Shaft: 25T Spline

  • Case Size (LxWxH): 35x15x29.2mm


Dimmensions:

Size: 35.0X15.0X29.2
  • Weight(g): 29.6

    Speed(@4.8V sec/60): .16

    Torque(@4.8V oz-in): 30.6

    Speed(@6.0V sec/60): .11

    Torque(@6.0V oz-in): 63.9

    Gear: Metal

    Bearing: 2BB

    Case: Aluminum

    Running current (at no load): 80 mA @ 4.8V

    Running current (at no load): 100 mA @ 6.0V

    Stall current (at locked): 800 mA @ 4.8V

    Stall current (at locked): 1000 mA @ 6.0V

    Idle current (at stopped): 6 mA @ 4.8V

    Idle current (at stopped): 6 mA @ 6.0V

    Limit angle: 210°±10°

    Connector wire gauge: #26 AWG

    Connector wire length: 250 ±5 mm

    Horn gear spline: 25T

    Control system: Pulse width modification

    Amplifier type: Digital Controller

    Operating Travel: 110° (when1000→2000 μsec)

    Neutral position: 1500 μsec

    Dead band width: 5 μsec

    Rotating direction: Counterclockwise (when1500→2000 μsec)

    Pulse width range: 800→2200 μsec

    Maximum travel: Approx 154°(when800→2200 μsec)